ER4-S Standard
click to enlarge images
Mounting Parts - Pit Traverse
Mounting Parts - Pit Traverse ...
PTO-shaft slurry pump ER4-S, Illustration
PTO-shaft slurry pump ER4-S, Illustration ...
PTO-shaft pump ER4-S in pit, Illustration
PTO-shaft pump ER4-S in pit, Illustration ...

Slurry / Manure Pump ER4-S Specification

ER4-type centrifugal slurry / manure pump to be powered with PTO-shaft for stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm.

The pump is equipped with a three-way valve to switch between the two possible operations of pumping or mixing. The agitation nozzle is pivotable 270° horizontally and vertically by 60°. Using the agitation nozzle it is possible to homogenise the slurry before pumping by stirring up floating or sinking layers.

The robust Euro-P-type impeller transforms the power of the drive into a high flow rate. The special design of the steel made impeller consists of an intake screw with hardened cutting edges to shred straw and fibres. The hefty cast-iron volute sustains even the most wearing applications and is one of the reasons for the high durability.

Basic length for pit depths up to 1.65m; all further extensions in steps of 25cm to the basic length. Special sizes are manufactured on request. Equipped with reinforced bearings and a high-compression impeller with extended intake screw for increased pressure.

Technical Specification


gear ratio 1 to 3
rated speed 1620 rpm
pressure line 133mm
quick coupling outlet side female Perrot (other quick couplings on request)
basic length 1.25m, all further extensions in steps of 25cm to the basic length
sealing carbon silicide mechanical seal
oil qty 2,5ltr. je Meter Mantelrohr
lubrication oil (pump shaft) HLP 46
lubrication oil (gearbox) SAE 90 GL5

Materials


volute cast iron
valve plug cast iron, optional brass
coupling housing cast iron
impeller and intake ring steel, matching drive power, with tungsten carbide edges
bolts stainless steel
other metal parts galvanized, stainless on request

Typical Fields of Application

  • manure agitation
  • homogenisation of manure before pumping
  • transfer to storage tank
  • flushing applications
  • filling of slurry tankers
  • biogas facilities

Standard Delivery

  • To order in correct length and correct layout please include:
  • basic unit + extensions + mounting parts


basic unit manure pump ER4-S Order No
ER4-S for GT 1,41-1,65 68-97-120
25cm extension extra length 68-98-001


Impressum | (c) 2010 Euro-P Kleindienst GmbH