Slurry / Manure Pump ER3-S w/o Nozzle Specification
ER3-type centrifugal slurry / manure pump to be powered with PTO-shaft fpr stationary use as a chopper mixing pump in pits an other storages (use only PTO shafts with a shear pin as safety mechanism). The gearbox is designed for an input speed of 540 rpm.
The robust Euro-P-type impeller transforms the power of the drive into a high flow rate. The special design of the steel made impeller consists of an intake screw with hardened cutting edges to shred straw and fibres. The hefty cast-iron volute sustains even the most wearing applications and is one of the reasons for the high durability.
Basic length for pit depths up to 1.65m; all further extensions in steps of 25cm to the basic length. Special sizes are manufactured on request.
Technical Specification
| gear ratio |
1 to 3 |
| rated speed |
1620 rpm |
| pressure line |
133mm |
| quick coupling outlet side |
female Perrot (other quick couplings on request) |
| basic length |
1.25m, all further extensions in steps of 25cm to the basic length |
| sealing |
carbon silicide mechanical seal |
| oil qty |
2,5ltr. je Meter Mantelrohr |
| lubrication oil (pump shaft) |
HLP 46 |
| lubrication oil (gearbox) |
SAE 90 GL5 |
Materials
| volute |
cast iron |
| coupling housing |
cast iron |
| impeller and intake ring |
steel, matching drive power, with tungsten carbide edges |
| bolts |
stainless steel |
| other metal parts |
galvanized, stainless on request |
Typical Fields of Application
- transfer to storage tank
- flushing applications
- filling of slurry tankers
Standard Delivery
- To order in correct length and correct layout please include:
basic unit + extensions + mounting parts
| basic unit manure pump ER3-S |
Order No |
| ER3-S for GT 1,41-1,65 |
68-93-123 |
| 25cm extension extra length |
68-92-001 |
| |
|
| impeller type standard |
68-90-350 |
| inpeller types with extra chopping facilities |
68-90-352 |
